Non-Corrosive Non-Acid Non-Alkaline Wheel Cleaner
Clean Wheels Touchless Brake Dust Removing, Brightening, Wheel & Tire Cleaner that is a non-corrosive, non-acid, non-alkaline, skin safe product we have developed . Here it is on a 2014 Volvo t6 left rear wheel . Directions :Pre-rinse with water to remove any loose dust and soils. Apply Clean Wheels Touchless to exposed, soiled and greasy brake dust covered wheel surface; Apply foam over the whole area. Let sit for 30-45 seconds. Rinse with hose gun on stream thoroughly rinsing off foam and revealing a clean and shiny wheel: all accomplished without kneeling, wrenching your back, getting knees wet, trying to reach all those areas of the wheel conventional products force us to. Not so with Clean Wheels™ Touchless Brake Dust Removing , Brightening Wheel & Tire Cleaner
We’ve all seen the progression, as we went from dragging our feet to stop on skates and skateboards, to back pedal braking on bikes, and now pad and disc braking like on todays modern cars. Now when braking, pads within the caliper, squeeze onto the rotor to stop vehicles, causing brake dust to blow off, settling on wheels, tires, and body panels. On some cars, like BMW’s, and FCA’s, the buildup is very noticeable, and unsightly. What used to work best was battery acid, or an awfully dangerous chemical called HFA (Hydrofluoric Acid). Through our innovative chemistry, we came up with, CleanWheels™, which thinks it’s an acid, that acts corrosive, but it’s not. It's CleanWheels™. With CleanWheels™ one spray on the soiled wheel and it rinses it off.
- Yield: up to 12 moderately soiled wheels
- Thinks it’s an Acid, but it’s not...
- Not an Alkaline
- Not Corrosive to Skin or Metal - Water based
- Safe to use
- pleasant odor
- Spray on, hose off (some difficult stains or imbedded stains in pitted wheels may need agitation)
- All of our products are non-corrosive, non-flammable, non-poisonous, with no harmful odors and Prop 65, SAFE and REACH compliant, as we want the best for our customers.
Apply in ambient temperatures 70°F / 21°C dry warm weather with little wind.
Apply and a cool dry area out of direct sunlight. Wet wheels with water.
Apply CLEAN WHEELS™ to the Exterior Surfaces of Wheels, getting into nooks and crannies. Let sit until all wheels have been saturated. Then blast off with full water pressure on stream standing 2-3’ from wheel, forward or aft of the wheel. Repeat if needed for stubborn soils or pitted wheels, which may require some agitation. Thoroughly wash and rinse after application to remove any left over residue. To add brilliance & luster to just cleaned wheels, polish them with Detailer’s Dream Products’® SHINY WHEELS™ Polished & Brushed Aluminum Wheel Polish
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call doctor if irritation persists. IF ON SKIN: Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Call a POISON CENTER or doctor/physician if you feel unwell. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell.